Montech Air 903 Base White (AIR 903 BASE W)
external
not available
Internal
1x 3.5" (transverse, HDD rails), 1x 2.5"/3.5" (transverse, HDD cage), 4x 2.5"
Connectors
1x USB-C 3.1 (10Gb/s, 20-Pin Key-A Header), 2x USB-A 3.0 (5Gb/s), 1x 3.5mm jack (Line-Out), 1x 3.5mm jack (Line-In)
PCI-slots
7
Fan(s) (front)
2x 140mm or 3x 140mm (optional)
Fan(s) (rear)
1x 140mm
Fans (left)
not available
Fans right
not available
Fan(s) (top)
3x 120mm (optional) or 2x 140mm (optional)
Fan(s) (bottom)
not available
Fans (other)
2x 120mm (optional)
radiator sizes
120/140/240/280/360mm front, 120/140/240/280/360mm top
Motherboard
to E-ATX (SSI EEB, 12"x13")
Supported motherboards
Mini-ITX (6.7"x6.7")/µATX (9.6"x9.6")/ATX (12"x9.6")/E-ATX (SSI CEB, 12"x10.5")/E-ATX (SSI EEB, 12"x13")
Power supply
ATX (max. 240mm deep)
Power supply position
bottom
CPU Coolers
max. 180mm height
Graphics Cards
max. 400mm
Colour
white, inside white
Lighting
without Illumination
Dimensions (WxHxD)
230x493x478mm
Capacity
54.20l
Type
Midi-Tower
front
Mesh
above
partially closed, mainly fan grill, dust filter outdoor
below
partially closed, fan grill rear, dust filter outdoor
left
closed, glass
right
closed
aft
partially closed, fan grill right top, PCI slots (7x horizontal)
front I/O position
Housing side: top, Height: centered, position: right
Motherboard-Alignment
motherboard-Alignment: to left; Connectors: connectors rear
Special features
Cable Management, dust filter, graphics card vertical mountable (optional), side panel window made out of glass
note to E-ATX
Mainboard and case manufacturers refer to different dimensions as E-ATX. E-ATX/SSI EEB mainboard dimensions of 305x330mm respectively 12"x13" may not be supported.
